RELIABILITY ANALYSIS OF THE MAIN COMPONENTS OF HYDRAULIC SYSTEMS OF MINING MACHINES

Authors

  • Abduaziziv Nabijon Azamatovich Professor, Department of Mining electromechanics, Navoi State Mining and Technology University, Republic of Uzbekistan, Navoi Region, Navoi city.
  • Zhuraev Akbar Shavkatovich Assistant professor, Department of Mining electromechanics, Navoi State Mining and Technology University, Republic of Uzbekistan, Navoi Region, Navoi city.
  • Sayfiev Javohir G'iyoz o'g'li Assistant, Department of Mining electromechanics, Navoi State Mining and Technology University, Republic of Uzbekistan, Navoi Region, Navoi city.
  • Ismatov Adham Alibek o`g`li Assistant, Department of Mining electromechanics, Navoi State Mining and Technology University, Republic of Uzbekistan, Navoi Region, Navoi city.

Abstract

Analysis of conditions and operating modes of hydraulic systems of mining machines shows that hydraulic units operate under stressful conditions characterized by constantly changing operating pressure, temperature conditions, pressure build-up rate, occurrence of hydraulic shocks and cyclic loads. This increases the probability of failure of hydraulic system components and can lead to failures, causing loss of working fluid. These circumstances make the task of developing effective schemes for protecting the hydraulic system from the release of working fluid when destroying high-pressure hoses and the problem of environmental protection urgent. [1,3-7]

References

Matveevsky R.M. Temperature resistance of boundary lubricating layers and solid lubricating coatings in friction of metals and alloys, Moscow, Nauka, 1971, 227 p. with illustration.

Ushakov N A improvement of devices for protecting hydraulic systems of construction and road vehicles from accidental release of working fluid.

Raykhanova G. Y., Djuraev R. U., Turdiyev S. A. DEVELOPMENT OF A NEW DESIGN OF CUTTING ELEMENTS FOR QUARRY EXCAVATOR BUCKETS AND RESULTS OF ITS EXPERIMENTAL RESEARCH //The American Journal of Engineering and Technology. – 2022. – Т. 4. – №. 04. – С. 68-78.

Turdiyev S. A. GIDRAVLIK YURITMANING TASHQI TARMOQ TAVSIFINI HISOBLASHNI ASOSLASH //Innovative Development in Educational Activities. – 2023. – Т. 2. – №. 5. – С. 327-333.

Turdiyev S. A., Akhmedov S. T. FUNDAMENTALS OF EXTERNAL NETWORK CHARACTERISTICS OF HYDRAULIC SYSTEM //Educational Research in Universal Sciences. – 2023. – Т. 2. – №. 1 SPECIAL. – С. 87-93.

Azamat M., Sherzod M., Lochin K. Research and assessment of the operational manufacturability of road transport equipment using modern on-board diagnostic and machine control systems //Universum: технические науки. – 2022. – №. 8-3 (101). – С. 33-36.

Джураев Р., Райхонов Ш. БУРҒИЛАШ ИШЛАРИДА ҚЎЛЛАНИЛАДИГАН ДИЗЕЛЬ ЭЛЕКТР СТАНЦИЯЛАРИНИ ЮРИТМАСИНИНГ ИССИҚЛИГИНИ ФОЙДАЛИ УТИЛИЗАЦИЯ ҚИЛИШ АСОСИДА УЛАРНИНГ САМАРАДОРЛИГИНИ ОШИРИШ //Innovatsion texnologiyalar. – 2023. – Т. 49. – №. 01. – С. 9-14.

Downloads

Published

2023-05-01

Issue

Section

Articles